PIONEER PL-7L(PL-90) Vintage Record Player Turntable 80s. Japan

PIONEER_PL_7L_PL_90_Vintage_Record_Player_Turntable_80s_Japan_01_qndh PIONEER PL-7L(PL-90) Vintage Record Player Turntable 80s. Japan
PIONEER PL-7L(PL-90) Vintage Record Player Turntable 80s. Japan
PIONEER PL-7L(PL-90) Vintage Record Player Turntable 80s. Japan
PIONEER PL-7L(PL-90) Vintage Record Player Turntable 80s. Japan
PIONEER PL-7L(PL-90) Vintage Record Player Turntable 80s. Japan
PIONEER PL-7L(PL-90) Vintage Record Player Turntable 80s. Japan
PIONEER PL-7L(PL-90) Vintage Record Player Turntable 80s. Japan
PIONEER PL-7L(PL-90) Vintage Record Player Turntable 80s. Japan
PIONEER PL-7L(PL-90) Vintage Record Player Turntable 80s. Japan
PIONEER PL-7L(PL-90) Vintage Record Player Turntable 80s. Japan
PIONEER PL-7L(PL-90) Vintage Record Player Turntable 80s. Japan
PIONEER PL-7L(PL-90) Vintage Record Player Turntable 80s. Japan

PIONEER PL-7L(PL-90) Vintage Record Player Turntable 80s. Japan
This model was produced exclusively for the domestic market in Japan. AC 100 V, 50 Hz / 60 Hz. Similar to the USA version PL-90. The tonearm is exactly the same as the world’s. DD LP EXCLUSIVE P3a. Has the longest tonearm with a length 282 mm. An analog player system Pioneer released in 1984. Or in different approach to the PL-70,50,30L the player made, design extruded mechanical hard is on the front was characteristic. Ultra-high-end DD LP EXCLUSIVE P3a also the structure of the huge insulator it bet was impressive. The greatest feature of the PL – 7L was its powerful insulator, as can be seen from its appearance. “Omnidirectional double in this method, named shoe Configuration System”, only the floor and the body is a conventional factors had become floating structure relative Interview configuration system, floor and under the board, respectively between the under board and cabinet the insulation had become double floating structure on which it is equipped. Moreover, the adoption of a low center of gravity structure and lateral damper, every person who had become the vibrations from the direction to effectively suppress structure. In addition, in order to remove the influence of the dust cover, the dust cover hood insulation are floating from the cabinet that is attached to the tone arm and motor from the floor had been adopted system. Based on the results of the vibration analysis, the tone arm adopted the DRA (Dynamic Resonance Absorber) method equipped with a damper with moderate spring characteristics and a secondary resonator consisting of weights. The DRA system, the resonance of the arm itself exhaust can be divided, since it is no longer constrained to the internal loss of the arms themselves, excellent in specific stiffness at high light Young’s modulus equipped with alumina ceramic tone arm It was. The shape of the arm pipe, high of advantageous mechanical strength in terms of weight had been adopted not straight. Automatically arm when the player is over the O stops the rotation of the turntable and lift-up had adopted a door lift-up method. The motor of the PL-7L, in principle, in addition to the coreless structure that cogging does not occur, a special magnetized to a very small torque ripple was equipped with a Quartz PLL DC servo motor which adopted the method. The motor of the bearing R OTOR SYSTEM adopted and coupled with uneven rotation 0.008% or had to achieve a high rotational accuracy (WRMS · FG direct-reading method). The turntable diameter 360 mm, weight 3.3 kg, inertial mass 655Kg-cm. Mounted weight class large turntable that was the starting characteristics revolution high torque coreless DC motor that (about 2 seconds) within normal disturbance Aima’ budge and not for was to achieve stability. As described above, PL-7L is equipped with a high-level players in the accumulated technology and know-how of the pioneer of until it effectively, the high was a player system that achieves excellent performance and not cost performance. Design was extruded a hard image to the front it seems ins was also unique and likes and dislikes, but I think that it is the machine name of the high cost performance. A reference master player of trust who is deeply satisfied by every time he drops a needle. High sensitivity, DRA mounted DRA pursuing no resonance Alumina ceramics Straight tone arm, mounted with anti-vibration structure weight. With the auto lift up mechanism that automatically lifts up the arm and stops the rotation of the turntable after the performance. 3.3 kg Weight class The large turn table and the high torque motor realize excellent rotation accuracy. Adoption of an omni-directional double insulation system and a hood insulation system that embodied the nonresonant idea. Calmly designed black woodgraining cabinet. Coreless Quartz PLL DC servo · Hall motor. SH · rotor type. 33 1/3 · 45 rpm. Changeover of rotation speed. 0.008% or less (WRMS FG direct reading method) 0.018% or less (WRMS / JIS). S / N ratio. 85 dB or more (DIN – B). 0% (stylus pressure within 200 g). All-around integral method FG. 0.002% or less. Time drift: 0.00008% / h Temperature drift: 0.00003% / ° C. +1.269 degrees -1.400 degrees. Adjustment of needle pressure. Weight one turn 3 g. 2.4 to 12.0 g. + 6 mm – 4 mm. Semiconductor used · Other. Crystal × 1, IC × 6, Hall element × 2, LED × 6, transistor × 9 diode × 10. Quartz lock indicator, quick stop, auto lift up. AC100V, 50 / 60Hz dual use. 596 (W) x 215 (H) x 434 (D) mm. The item “PIONEER PL-7L(PL-90) Vintage Record Player Turntable 80s. Japan” is in sale since Friday, March 22, 2019. This item is in the category “Consumer Electronics\Vintage Electronics\Vintage Audio & Video\Vintage Record Players”. The seller is “stranik1963″ and is located in Moscow. This item can be shipped worldwide.
  • Model: PL-7L
  • Country/Region of Manufacture: Japan
  • Brand: Pioneer

PIONEER PL-7L(PL-90) Vintage Record Player Turntable 80s. Japan
Written by
Posts: 4958