Bang Olufsen Beogram 4002 Turntable TANGENTIAL Rosewood CUSTOM RCA Serviced
Automatic record size detection with a photo-diode’Magic Eye’ detector arm places the needle directly on the lead-in groove and lifts it at the end of the recording. Tangential tracking keeps the stylus at the optimum angle for unrivaled contact and signal reproduction. Playing the recording at exactly the same angle as it was cut. You’ll hear all the nuances of the recording, often sounding like a different (better) track. Fully automatic operation Lift, drop or’fast forward and rewind’ the tone arm through an album using the wonderfully crafted aluminium buttons. Original B&O On/Off switch still present and working at the rear of the deck. So many lose this or worse – it breaks off. +3 or -3 speed adjustment on both 33 and 45 RPM. All lights working including speed displays and front power indicator red LED. Stylus pictured is not included but there’s a full spectrum of the MMC20 range (plus a quadraphonic MMC6000 and 4000) available in my other listings. Award winning design for electro-mechanics and easy to see why when it’s still working beautifully OVER 40 YEARS later. Beomaster 4000 Receiver (1970’s) to really power the spectacular reproduction of this deck. MMC20EN state-of-the-art nude eliptical diamond integrated cartridge-stylus to find nuance in the record groove and play it back as you’ve never heard before. Beovox S45-2’s or S75’s to reproduce the dynamic range possible from this equipment. MMC20CL cart for the very best contact with th e record groove. M75’s or M100 for monitor class sound output from your top end signal. Designer: Jacob Jensen Colours: Rosewood, Teak, White, Oak. The replacement for the Beogram 4000, this deck actually existed in a number of forms, the first using the AC motor of the 4000 and later ones using a DC motor. In terms of concept, performance and technical design, this record player was very much ahead of its time. All functions were governed by computer-like logic circuits. You just pressed START, that was all. Within a few seconds you would hear the music. If there was no record on the platter the stylus could not be lowered, so the system was safe as well as simple. Records could be tracked more accurately because the tangential arm traced a straight line from the record’s edge to its centre, instead of tracing an arc as radial arms do. This method entirely eliminated inward bias (skating effect) and tracking angle error was almost non-existent. Bang & Olufsen’s Beogram 4002 turntable was awarded the’Gold Sim 74′ and’Top Form 74′ prizes in the category of electro-mechanics. Beogram 4004/4002 could be made up as part of the Beosystem 4400 or the quadraphonic Beosystem 6000 when linked together with other compatible Bang & Olufsen products. Beogram 4004/4002 was an electronically controlled stereo record player with tangential arm. The unit utilised a belt drive system to control the record deck. Thanks to the incorporation of advanced electronics, several advantages were gained from this new concept in record-players: high specification, supreme automation of all functions and the most gentle treatment of records. The tangential arm moved the pick-up in a straight line towards the centre of the record, reducing tracking error to a mere 0.04%. The record player was fitted with the MMC4000 pick-up cartridge (later MMC20EN) which had a frequency range of 20-25.000 Hz ±1.5 dB. It had an integrated, elliptical naked diamond stylus with a stylus pressure of 1g. Rotation of the turntable was governed by a synchronous motor which was power-driven via a stabilised oscillator which made it independent of mains voltage and frequency fluctuations. Wow and flutter was less than ± 0.05 % and rumble better than 65 dB. A photocell in the record-player’s second arm registered the size of the record and the speed at which it should be played. Advanced electronics governed the actions of the pick-up arm: lifting, lowering, etc. However, the record-player could be operated manually by use of the large “easy-touch” control plate. Operation of the record deck was very easy as all functions were governed by computer logic circuits. With its tangential detector arm that was parallel to the linear tracking tonearm, the unit could sense the size and speed of the record to be played and lowered the stylus into the lead-in groove. It had cueing controls to raise and lower the tonearm to where you wanted it on the record. If there was no record on the turntable and you pushed START, it would not lower the stylus on the turntable. Manual selectors to determine the speed of the record player were incorporated; however, the turntable was fully automatic so all you had to do was put on the record and press START. Beogram 4004/4002 was fitted with a hinged dust lid which could be opened to any angle up to about 60 degrees or completely removed by easy sliding action. Most of these are available in my other listings already or I have them in stock so do have a look below, if not I can source them for you in a few days. Please message me for that service. WORLDWIDE carriage may cost more OR LESS!! Than the listing states (I have to enter an estimated figure) and will be charged in full as per the service chosen and destination country. Eg, air, surface, express, economy. IF IN ANY DOUBT PLEASE ASK FOR A QUOTE. I NEED YOUR FULL ADDRESS FOR THIS. You may have noticed that these has risen lately. I’m sorry that these have to be passed onto you. Qualitronics aims to recycle packaging as much as possible but it will always be top quality and usually it’s double-box where appropriate too. I’m running this business part-time whilst I raise my children. She says THANK YOU VERY MUCH! Tommy is a terror-bag Toddler, 2 years old and his dimples charm the world. I endeavour to source the HIGHEST quality electronics, mostly B&O HiFi and will have owned most of the models in question at some time in my life. This gives me a real experience of the merits to share with you. I’m a time-served Sound Engineer and use my trained ear to check each audio item. It’s not just sonics though, look out for the weird and wonderful… As long as it’s well made. Please call the customer service line accessed by clicking the “ask a question” feature or opening the “full information” link in the business information section below. The full number is not always displayed. Often the first zero is missing. PRODUCTION DESIGNERS AND PROPERTIES BUYERS A number of my items have now featured in TV ads, theatre and film productions and professional photography having been bought by production designers, location agents and properties buyers. These include a Beocenter 2200, Beocenter 7007, Beovox S45 speakers. I recognise the tight deadlines that you have to work to and the immediacy you often have to work under. Customer service line accessed by clicking the “ask a question” feature or opening the “full information” link in the business information section below. This is actively encouraged! Do check in advance the location of the item you’re interested in. A quick call will be all that’s needed to confirm the whereabouts. Whilst the business is registered in London, I also have stock stored near Maidstone, Manchester and the Midlands. You receive the assurance of a properly connected system, including optimum placement design and the benefit of a full demonstration, highlighting the tips and techniques garnered from decades of experience and expertise. Recent installations have ranged from a single Beocenter being connected to the existing speakers and unit for an 89-years young-lady for a few hundred pounds to a multi-room, Beocenter, Beogram, Beovox and B&O dedicated cabinet and stands combination, with remote control, for a few thousand pounds. Please use the “ask a question” feature to access the pre-sales telephone number to discuss your requirements. Can’t find that B&O product that you’ve yearned for since you were a kid? Need a rare or discontinued part to repair your unit? If I don’t have it in stock, then I can normally source one very quickly. I have a wide network of fellow enthusiasts, collectors, dealerships and retired B&O Engineers whom I can call upon to fulfill your needs. On very rare occasions, there may be an issue with your order, such as courier damage or simply leaving transit screws engaged. Please use the contact number shown when you select the “ask a question” button. I realise that you are very, very busy, only one in three of my clients has found the time to leave feedback that also informs their peers of their positive experience. Indeed all of Qualitronics’ feedback is from buyers and not inflated by that of other sellers. Your contribution will be greatly appreciated. All electrical items are UK voltage (240v) and B&O UK “type xxxx” unless otherwise stated. Check out my other listings. The item “Bang Olufsen Beogram 4002 Turntable TANGENTIAL Rosewood CUSTOM RCA Serviced” is in sale since Friday, October 2, 2020. This item is in the category “Sound & Vision\Home Audio & HiFi Separates\Record Players/Turntables”. The seller is “qualitronics” and is located in LONDON, London. This item can be shipped worldwide.
- Brand: Bang & Olufsen
- Product Line: Beogram
- Colour: Teak
- Custom Bundle: No
- Non-Domestic Product: No
- Modified Item: No
- Model: Beogram 4002
- Type: Turntable
- Country/Region of Manufacture: Denmark
- Speed Settings: 33.3RPM
- Audio Outputs: DIN
- MPN: Beogram 4002
- Features: Belt Drive