Audio Technica AT-F2 MC CARTRIDGE Moving coil Phono cartridge

Audio_Technica_AT_F2_MC_CARTRIDGE_Moving_coil_Phono_cartridge_01_ng Audio Technica AT-F2 MC CARTRIDGE Moving coil Phono cartridge
Audio Technica AT-F2 MC CARTRIDGE Moving coil Phono cartridge
Audio Technica AT-F2 MC CARTRIDGE Moving coil Phono cartridge

Audio Technica AT-F2 MC CARTRIDGE Moving coil Phono cartridge
Audio Technica AT – F2 MC Cartridge – Last few! Brand new, fully boxed ATF2. Complete with all accessories including. Stylus Guard, Cartridge mounting hardware. Features the celebrated dual coil design and elliptical stylus. Class leading quality of sound and reliability. Neodymium magnet is employed for maximum energy. PCOCC coil enables purer transmission. Power is generated independently for the left and right channels. Precision-crafted sturdy aluminium alloy base. High-quality sound comparable to more expensive models, the AT-F2 provides outstanding value and performance, which delights those who appreciate the sound quality of analogue records. Diameter stainless suspension wire The AT-F2 uses 0.07 mm diameter stainless suspension wire, which serves an important role as a fulcrum point for audio signal transfer. This stainless wire is used for higher quality MC-type cartridges. This stabilises the fulcrum position and enables auditory lateralisation to provide excellent expression of the high-frequency range. Neodymium magnet for dramatically increased magnetic energy The neodymium magnet provides maximum energy (BHmax of 50[kJ/m3]), while the pure iron yoke provides excellent magnetic properties. Together, they further boast the magnetic field concentrated in the coil gap area. PCOCC used for coils and terminal pins PCOCC does not give rise to crystalline resistance in the transmission direction, enabling audiophiles to enjoy pure transmissions. Dual moving coil with high separation and wide response Our unique moving coil type cartridge has a basic structure where one cylindrical coil is used for the left channel and another is used for the right channel. This structure by which power is generated independently for the left and right channels physically provides outstanding separation characteristics. The leakage of signals from one channel into the other exerts a decisive influence on the stereo expanse as well as on the sound quality. This is because this leakage is tantamount to creating irregular cross modulation. The reason why the dual moving coil system delivers such a clear and finely delineated sound quality is no doubt due to the systems naturally excellent separation. The AT-F2 features a reverse V-shaped formation for the two left and right coils to reduce the vibration mass as seen from the stylus tip. Durable construction dedicated to achieving increased rigidity Using a precision-crafted sturdy aluminium alloy as the base, the bodys structure is made of hard resin which minimises parasitic resonance. This achieves greater rigidity and improves signal-to-noise ratio. 15 – 30,000Hz. 0.32mV 1kHz and 5cm/sec. Vertical Tracking Force Range. 1.8 – 2.2g (2.0g standard). 0.3 x 0.7 mil. 17.3 (H) x 16.8 (W) x 25.4 (L) mm. When the stylus is to be replaced, replace the entire cartridge. Take the used cartridge to your Audio-Technica Authorised Service Centre. The item “Audio Technica AT-F2 MC CARTRIDGE Moving coil Phono cartridge” is in sale since Saturday, June 19, 2021. This item is in the category “Sound & Vision\Home Audio & HiFi Separates\Record Players/Turntables”. The seller is “the_audio_files” and is located in Berkshire UK. This item can be shipped worldwide.
  • Model: AT F2
  • Country/Region of Manufacture: Japan
  • Speed Settings: 33.3RPM
  • Brand: Audio-Technica
  • Manufacturer Warranty: 2 years

Audio Technica AT-F2 MC CARTRIDGE Moving coil Phono cartridge
Written by
Posts: 4473