Turntable Record Player Dustcover Lid & Hinge kit For Ariston, Linn etc

Turntable_Record_Player_Dustcover_Lid_Hinge_kit_For_Ariston_Linn_etc_01_rgl Turntable Record Player Dustcover Lid & Hinge kit For Ariston, Linn etc
Turntable Record Player Dustcover Lid & Hinge kit For Ariston, Linn etc

Turntable Record Player Dustcover Lid & Hinge kit For Ariston, Linn etc
Lid Dustcover for turntable with hinges and hinge plates. This is a clear acrylic lid plus hinge kit for Turntables. It was original made to fit a well known Japanese Branded turntable but since many/most turntable plinths had similar dimensions, this has been found to be ideal for replacing lost/broken covers or as part of a record player build/restoration. The brand is printed onto the small centre label and if you can’t live with this, it can be removed or covered with a bit of care. The lid is a well made and properly moulded item (not of the cheaper’blown’ or fabricated from sheet variety). Note that the clear plastic has a slight blue tinge – but not as pronounced as in the picture. 443mm x 347mm x 69mm. Please measure your plinth and check that these dimensions will be satisfactory since plinth sizes do vary, even within one manufacturers range. Also check that the internal height is sufficient to clear your tonearm (this can be flexed by a few mm by raising the hight at which the hinges fit at the rear). It will also fit the Linn Basik turntable but will not fit the Linn Axis due to the position of the rear heatsink on that turntable. The general thickness of the acrylic is just over 3mm. The lower edge (ie the edge which is in contact with the record player) is 4mm all round. See pictures which show the lid and hinge parts provided. Note that the pictures make the lid look a little’blue’ but in real life it is almost perfectly clear. The lid comes complete with a pair of hinges and a pair of hinge mounting bases. The hinges are compatible with the lid – fitting into a formed’pocket’ on the rear face, and the hinge bases can be screwed to the rear of the turntable plinth. This allows the lid to be opened with the hinges supporting the lids weight; or removed completely simply by lifting off. It will be very well packaged and boxed and sent by 2nd Class Post. The item “Turntable Record Player Dustcover Lid & Hinge kit For Ariston, Linn etc” is in sale since Sunday, August 19, 2018. This item is in the category “Sound & Vision\Home Audio & HiFi Separates\Record Players/Turntables”. The seller is “the_audio_files” and is located in Berkshire UK. This item can be shipped to all countries in Europe, Antigua and barbuda, Australia, United States, Canada, Brazil, Japan, New Zealand, China, Israel, Hong Kong, Indonesia, Malaysia, Mexico, Singapore, South Korea, Taiwan, Thailand, Bangladesh, Belize, Bermuda, Bolivia, Barbados, Brunei darussalam, Cayman islands, Dominica, Ecuador, Egypt, Guadeloupe, Grenada, French guiana, Jordan, Cambodia, Saint kitts and nevis, Saint lucia, Sri lanka, Macao, Maldives, Montserrat, Martinique, Nicaragua, Oman, Pakistan, Peru, Paraguay, Reunion, Turks and caicos islands, Aruba, Saudi arabia, South africa, United arab emirates, Chile.
  • Speed Settings: 33.3RPM
  • MPN: Does Not Apply
  • Brand: Audio-technica

Turntable Record Player Dustcover Lid & Hinge kit For Ariston, Linn etc
Written by
Posts: 4497